Rugged Embedded Mission Computer

 
 

HiDANplus® HDP1051 Overview

RTD's HDP1051 embedded computer system provides a robust Commercial-Off-the-Shelf (COTS) solution enabling rapid uptime for mission-critical applications. The system includes a high-reliability Intel Core i7 dual-core single board computer, a robust synchronous power supply, and a high-speed 12-bit data acquisition module.

The milled aluminum enclosure with advanced heat sinking and heat fins delivers passively-cooled performance from -40 to +85°C. Integrated tongue-and-groove architecture with EMI gaskets create a watertight solution with excellent environmental isolation. Keyed cylindrical connectors offer easy cable connections while maintaining the integrity of the environmental seal. A comprehensive development cable kit is available.

Key Features

  • Intel® Core i7 Dual-Core Processor with ECC Memory

  • 8GB surface-mount DDR3 SDRAM

  • 60GB surface-mount industrial SATA flash drive (standard)

  • DM35425 software-configurable 12-bit data acquisition module

  • ATX3510 synchronous power supply (194.8 W combined output)

  • COTS pre-configured with no additional engineering fees

  • Locking cylindrical connectors

  • Watertight, dust-tight design qualified to IP67 and IP69

  • -40 to +85°C operating temperature

Specifications

Connector Interface

  • MIL-DTL-38999 Series III cylindrical connectors with plug protection covers

  • J1: Analog/Digital I/O (DM35425 CN3 signals)

  • J2: Analog/Digital I/O (DM35425 CN4 signals)

  • COM: 2 full, 4 partial

  • PWR: power input, ON/OFF signaling,
    +5/+12 Vdc output, 8-36 Vdc input

  • LAN: dual Gigabit Ethernet

  • UTILITY: 4 USB, SVGA, CPU reset

  • L1: CPU status LED

  • L2: user-programmable LED

Environmental

  • Operating temperature: -40 to +85°C,
    90% humidity non-condensing

  • Storage temperature: -40 to +85°C

  • IP67 and IP69 certified design for dust and water ingress protection

  • Passively convection cooled without forced air, fans, or moving parts

Power

  • Power input requirements: 8-36 Vdc

  • Power consumption: 21 W typical, 37 W max

Physical Characteristics

  • 4.92 x 7.35 x 7.30 inches (124.97 x 186.69 x 185.42 mm) - front panel LEDs and connectors extend beyond these chassis dimensions

  • 7.4 lbs. (3.4 Kg.)

  • Aluminum Alloy - 6061, Temper-T6

  • Exterior finish: light gray polyurethane
    (FED-STD-595 color 36495)

+ Intel Core i7 Based CPU Details

  • Intel Core i7 3517UE with ECC Memory
    • Dual-Core
    • 1.7 GHz Clock Speed
    • 2.8 GHz Max Turbo Frequency
    • 105°C Max. Core Temperature
  • 8GB Dual-Channel DDR3 SDRAM (Surface-Mounted)
    • Robust Error Code Correction (ECC)
  • 60GB standard surface-mounted industrial-grade SATA flash drive
  • Eight x1 PCIe Links
  • Three x4 PCIe Links
  • Five SATA Ports
  • Four Serial Ports (RS-232/422/485)
  • Can also be used with USB 2.0 devices
  • Three USB 2.0 Ports
  • Dual Gigabit Ethernet
  • Analog VGA
  • Advanced Digital I/O (aDIO)
  • Trusted Platform Module (TPM) available as a separate ordering option
    • Fully compliant to the Trusted Computing Group (TCG) Trusted Platform Module (TPM) version 1.2 specification
    • Provides for secure storage of cryptographic keys
  • View the CMA34CRD CPU board-level datasheet

+ DM35425 Details

High-speed Analog Inputs

  • 16 differential or 32 single-ended analog input channels
  • Programmable input range per channel: ±5, ±10, 0 to +10V
  • Programmable gain per channel: 1,2 ,4 & 8
  • Programmable single ended or differential inputs per channels
  • 1.25 MSPS maximum input sampling rate (multiplexed)
  • 12-bit resolution
  • Threshold detection can generate an interrupt, or be used as a start or stop trigger
  • Configurable IIR filter on each channel

Analog outputs

  • 4 high-speed channels
  • 12-bit D/A converters
  • ±5, +5, ±10, & +10V output ranges
  • 7 µs full-scale settling time
  • 5mA output drive current

Digital I/O

  • 32-bit port of digital I/O
  • Bit programmable direction
  • Advanced digital interrupts and DMA
  • -12/+12mA output drive current
  • Parallel Bus Mode
  • External Clocking
  • Provides 6 external clock pins that can be used as input or output
  • Provides external triggering
  • External Gate for each clock pin

Additional Details

+ ATX3510 Power Supply Details

  • Input Voltage Range: 8-36V
  • 194.8 Watts maximum output power
  • Outputs
    • +5 Vdc at 16.8 amps
    • +12 Vdc at 8.4 amps
    • +5 Vdc Standby at 2.0 amps
    • +3.3 Vdc at 2.0 amps
  • ATX signals
    • +5VSB
    • PS_ON#
    • PWRGOOD
  • Efficiency as high as 90%
  • Reverse voltage protection to -40V
  • Input over-current protection
  • Input over voltage protection clamps to 36V
  • Output over-current protection
  • Remote ON/OFF function
  • Synchronized supplies to reduce noise
  • Spread spectrum capable
  • No Electrolytic caps
  • View the ATX3510 power supply board-level datasheet

+ What's Included

  • System Components
    • Single Board CPU
    • mSATA carrier with speaker and battery
    • 12-bit data acquisition module
    • 190 Watt ATX Power Supply
    • Lid, Base, and Bolts
  • Companion CD with drivers, Datalight ROM-DOS, and manuals
  • Standard 1-year Warranty

+ Options

  • Development Cable Kit
  • Removable 2.5 inch SATA drive (hinged door frame adds 1.331 inches to the overall system height)
  • Customization: RTD can create "modified" or "tailored" systems with customer-determined I/O connectors and pinouts. If you'd like functionality that isn't shown here, call us. These systems are the "base units" upon which many other configurations can be built.

Ready to take the next step?

Do you have some technical questions? Or maybe you'd like a quotation? Call or email us to be directly in touch with RTD Engineering and Sales staff.

Tel: +1-814-234-8087
techsupport@rtd.com
sales@rtd.com